Garage Door Springs and Cable Tension

Garage Door Springs & Cable Tension - Sacramento Garage Doors

Garage Door Springs and Cable Tension

Garage Door Spring & Cable Tension

The proper tension is required for your garage door to open and close properly. If the spring tension is not precisely balanced, the garage door may open or close unevenly or at an incorrect pace. You can learn how to fix garage door cable tension on your own. However, because the springs and wires are under so much tension, working with the best garage door company is the best option for your time and safety. If you would rather do it yourself, you should know how to release the garage door springs and cable tension because it will make your job easier. Here are some pointers for adjusting the spring tension on an overhead garage door.

Get Your Tools Ready

You’ll need some tools and safety equipment to adjust the garage door tension. A robust ladder, an adjustable wrench, safety glasses, two C clamps, a hard hat, gloves, and a marker is necessary for this job. If you don’t have these tools, contact LMS Garage Doors for garage door repair services.

Recognize The Springs

There are two types of springs that may be used in your garage: 

  • Extension springs installed on the track’s side are simple to modify and run parallel to the track. These springs are located on both sides of the garage door. 
  • Torsion springs, on the other hand, are located above the garage door and run parallel to the top of the door.

Garage Door Tension Spring Adjustment

Before you can modify tension, you must first determine what is causing the incorrect tension in the first place. The following are some issues that may need adjusting the garage door springs.

  • You’ll need to equalize the tension when the garage door closes unevenly.
  • If the door isn’t shutting completely, it’s difficult to close, or it closes too quickly, you’ll need to reduce the tension.
  • You’ll need to raise tension if the door is difficult to open or closes too rapidly.

Open Your Garage Door

Before you can work on your garage door problems, you must first release the tension in the springs. The best approach to relieve tension on a garage door cable is to leave the door open. Begin by clamping the door open with C clamps on each door track under the bottom rollers.

Then, using your step ladder, you’ll gain access to the cable that keeps the garage door open. Because there is no stress on the spring, you may easily take it from the track hanger and move it to a different hole to adjust the tension. If you’re not familiar with how your garage door operates, please contact a professional. 

 

How to Adjust Your Garage Door Springs

The next step to adjusting the garage door springs and cable tension is to adjust the garage door springs. You must equally adjust both springs by moving the hook to a separate hole at a time. To reduce tension, transfer the spring hook to a lower hole in the door track. This lessens the stress in the spring.

Hook the wire to a hole higher on the door track if you’re curious on how to tighten the garage door springs and boost tension. This stretches the spring and adds tension to it. Then, adjust the garage door cable on the side where there was a gap if you want to adjust the tension on one side. Reduce tension by hooking the cable to a lower hole on the hanger. Adjusting your garage door springs and cable tension may seem easy, but it’s a lot harder than it looks. Don’t hesitate to call LMS Garage Doors.

Test Your Garage Door Repair

After you’ve made the necessary modifications, unclamp the door and test it to see how it feels. Continue adjusting the door until it closes properly. You can always contact LMS Garage Doors in Sacramento. Our team of professional garage door repairmen is always available to help. Give us a call today for an estimate on high-quality garage door services in Sacramento. Follow us on Instagram and Facebook for our latest garage door updates!